Mike Ashcroft

Stock car and all spares now sold... Race Transporter as specified above still available, open to reasonable/sensible offers. Mike 07866 659840

2 more pics. 1 of car in shale mode with (bonnet with scoop) and picture loading into transporter.

Car as it stands now. Minor damage from Birmingahm now repaired (front axle, shocker) and chassis repainted. Car comes with spare front axle, shockers, springs, calipers, pads, radius arms, torque arm, front and rear panhard rods, oil, oil filters, wheels, tyres, complete new tilton clutch (done 2 races), seat belts, kirkey seat, etc etc etc... Price,car spec and contact details as original post.

Can anybody out there tell me where I can get a copy of a DVD from the JULY SKEGGY SPEEDWEEKEND (the sunny one). Thanks in anticipation Mike A

The do is ticket only, not sure if there are any left but you need to speak to Pauline Tempest to check. I will pm you her contact details later. Mike

LINK TO WES's CAR ON EBAY Posted on behalf of Mr Goodwin.

COMPLETE F1 STOCKCAR OUTFIT FOR SALE BriSCA F1 STOCK CAR My BriSCA F1, Timperley/Fairhurst built in 2004, dual surface car only raced on tar for last 2 seasons. Performance Unlimited (Dave Powell) 510ci big block rebuilt by Dave in 2008 including new Dart Block, Cam, Pistons, and Valves etc. Brodix ally heads, again refurbed by Dave at same time as rebuild. Peak power 608 bhp at 5900rpm, peak torque 604llbs/ft at 4600rpm, very flat torque curve. New 950cfm carb, Carter fuel pump, new MSD distributor and leads. Big radtec radiator (never need to be chucking water around with this one) New “Harrison supplies” H2Q (Doug Nash) gearbox bought only late 2007 with new Tilton triple plate clutch/hydraulic release kit and ally bell housing. New “NW propshafts” balanced prop fitted May ’08. Car sits on transit front axle, LD rear axle, proflex shocks and is ready to go “on the button” with MSD ignition, power steering, Kirkey lightweight seat, belts, tarmac race wing. Loads of spares including many wheels/tyres, shocks, brake callipers/pads, front axle, diff, f & r radius arms, torque arm plus even oil and filters!!! Dyno sheets and all purchase receipts available to serious interested buyers. All this car needs is a decent “nut to hold the wheel on” and is ready to go when you are!!! £13,000 ovno for everything ALSO MERC 814 RACE TRANSPORTER MW Fabrications (Mark Webster) converted 7.5t box truck (drive on a car license). Taxed until end Feb '09 MOT until March '09 Will seat 4-6 up front in comfort, fully maintained regardless of cost and bullet proof reliability. Front section of box converted into small Kitchen with seating for 4, hob + table which converts into double bed. Rear of box fully chequer plated, very powerful winch, tie down anchor points, air lines and tyre rack. Rear is wired for 240V elec with exterior high mounted flood lights ready to be powered by stand alone generator. This truck really has all you could wish for in a race transporter without the need for a HGV license or Richard Bransons’ cheque book. £6500 ovno Contact Mike Ashcroft via PM, email: mike@gmhq.fsnet.co.uk or anytime on 07866 659840. Buy the complete kit and I’ll throw in my generator and porta-power, transponder plus any F1 specific tools. I will be racing the car at the last 2 Birmingham meetings this year (18th Oct15th Nov) and from then on until sold. Come and see us at either meeting, reasonable deposit will ensure car taken out of use with immediate effect. NB…Transporter will not be sold separately prior to sale of F1.

Probably best to talk to Wes (contact above), I know what area he's looking at but not my place to discuss tbh. Mike

Hmmmm, that'd be tellin'

ta mate

FWJ tarmac car built in 2006 (dual surface). Ex Mark Keeling , 600+bhp small block fully overhauled by CJBS 8 meetings ago, Doug Nash box, car maintained regardless of cost, some spares. Phone Wes Goodwin on 07969 899829 or 0161 789 4545 (day) for more details. Photo to follow.....

text me your number to 07866 659840 Chris. I'll have a ring round for you tomorrow. mike

We currently have 6 sets of twin coach seats available for sale @ £10 per seat. Contact Derek on 07901 970800 if interested.

This one Mark? Un-ashamedly nicked of the V8 site And in tar mode

Sort of used the car share system last year when Richard and I put a bus up for the last KL and it worked really well. Quite a few who went probably wouldn't have done if the bus didn't go so that's a from us!! I'l certainly keep an eye on the section in '08 as on occaisions we might have a space or 3 on the 278 truck avaialable. As Pete says any injection of cash into the deisel pot will be very welcome no matter how small. Best of luck with your effort guys, great idea, well woth supporting and using wherever possible. M

Sorry to see you're packing in Neil, see you around no doubt.

OOOOPPS...think that was me! " I can make that gap....OH SH** I CAN'T....BANG" or something along those lines...Fairhurst wasn't to pleased either

Dave Sharpe of STOCKCAR JIGSAWS has a few PERSONALLY SIGNED Frankie Wainman Senior jigsaws still available. These jigsaws are A4 in size and are 80 piece sets. Each jigsaw was personally signed by Frank before they were cut and sealed. The jigsaws are priced at just £8.00 plus £2 p&p but if you want to avoid the postage arrangements can be made for them to be delivered to the tracks. Contact Dave at HIS EMAIL or on 07904 114032.

Come on all you F1 wanabe's, good car, kit, transporter, spares..the lot !!!! Got to be worth the money being asked...what an opportunity

The tyre was sponsored by Dave Wood of the "Swinton Car Project" after discudions between our own Kay Blackburn and NFR. They have their fingers in a few oval pies and are backed by other organisations such as the Forestry Commision. It's by virtue of the projects help that Kirsten is racing a V8 at Skeg and (probably) NIR next week.

It's OK lads we'll have a few spare boxes for you both to stand on this weekend, two each should just about get you above bar hieght I rekin

Now sorted, Many thanks for the offers of help from Colin C and Marie. Mike (for Derek)

If, by any stretch of the imagination, anyone is in the Peterborough area toady and would be willing to collect a crankshaft from Lyndale can you please contact me either by PM or phone 07866 659840. Lee Fairhurst needs a crank collecting and prob taking to Lynn thios weekend. Due to holidays at Lyndale the item needs collecting TODAY , arrangements are in place for the item to be paid for up front so it would just be a quick collectioon and a delivery to the 218 team on Saturday. If anyone can help I can put you in touch with Derek. Thanks in advance. Mike (for Derek)

Sorted!! Thanks to Gerry Cole and SHH391 for the help. Mike