Craig52

Mk5 smiley face transit 6 stud rear axle. Never raced or rallied. £50. You need to collect. Craig Haworth 01706 712198 Rochdale.

Bit harsh saying stock car racing is killing people. I havn't heard of anyone testing positive from going to a meeting. It all kicked off again when the universities opened and they all started partying then giving it to all and sundry. Send those idiots home and things will calm down i'm sure.

The chevvy country logo appeared on our car at a Skeggy weekend with Ford changed to Pontiac. Needless to say it got changed around and re-appeared on the 14 car. Did some mileage that night that sign.

Think that's the best one yet.

Anyone ? give me a ring on 01706 712198 if you can help out. Ta Craig

We're in need of a bit of ally checker plate for Mike Heywood., Enough to cover 6 foot by 19 inch twice. 3 or 4 mm, 5 if it's cheap.2 pieces are ok, used is fine. Up north preferable. Craig

Is there anyone around the Rochdale/North Manchester area that can weld cast iron. Not an engine part but cast iron all the same. just give me a ring if you can, Craig 01706 712198 or 07930 999925 Ta

You tell 'em Steve....

Anyone ?

We're on the cadge again for the Mike Heywood 424 car. Has anyone got a left turn sump with windage tray for a 454 they don't need any more. ? ring Craig on 01706 712198 if you can help. Ta Craig 52

Late heritage tyre. Hoosier dirt stocker, 26.0 / 7.0-15. Free to good home. Craig, 01706 712198

Kev, PM'd you.

Mike's car had oil pressure problems the day before the last Vue. Finally we think we've got it down to an open relief valve on the oil pump. New pump and gaskets are here along with a new rear crank seal that mysteriously sprang a leak and an inlet manifold gasket kit, part of which managed to wriggle out at the front corner while it was sat doing nothing all winter. Yeh, we don't know how either. Big problem now is i've just had a hernia op' so i'm out of action for a bit. Lads have got it on the ramp tonight and drained it off and we've decided the quickest way to sort it is to cut the sump guard out underneath the engine, fettle what we need to fettle and then weld it back in. Shame, he was ready to go from the off. He'll be back as soon as i can get to it and get it sorted. Craig

But very cold..........

424 is very doubtful. It's downstairs from where i'm currently sitting and it's not ready yet, nearly but not quite.

Fine drizzle in north Manchester. If Belle Vue is the same the track should stay good without the water cart. Craig

Got one. Many thanks to Danny Clarke.

As it says, WANTED Performance inlet manifold for 454 BB for Mike Heywood. Hopefully with all these small blocks around someone will have some big block bits lying around not being used. Need one with rectangular ports. Contact Craig on 01706 712198 Ta

544 Ben Howard was my first boy on work experience many moons ago and now works with the Williams Grand Prix team so he can only race wen he's back in the country. He hired a Mitchell F2 last year for a few meetings and has a deal for around 10 meetings this year. The F1 drive comes courtesy of a garage tour at Silverstone this year for the car owner and his mate. I think he'll do alright once he gets the hang of the power and the different driving style. He's been doing well in the 2's. Craig

Got one. All we need to do now is get it up from Birmingham.

Wanted, Lakewood steel bell housing for big block chevy for the Mike Heywood 424 car. His god knows how old home made thing is about as round as one of my outside rears used to be. PM or give me a ring on 01706 712198 work hours and 7.30 till 10 Tues/Thurs nights and Saturdays. Craig

Cheers Carl

Has anyone got a smiley faced Transit pref' LWB with some test on it. Need a stand in whilst i redo mine and then use some bits off it. Pref cheap. Craig 52 work no 01706 712198

We are currently bringing the Mike Heywood car up to scratch and as he has a seriouse budget problem we are on the cadge for a pair of silencers if someone has an old pair lying around that are still fit to use. If you can help please PM me or give me a ring on 01706 712198 Work no Craig 52