Jump to content

Paul Mc

Member
  • Joined

  • Last visited

Everything posted by Paul Mc

  1. NATIONAL MINISTOX FOR SALE Tony Smith built chassis formerly raced by Peel Bros Chassis Built for a 6ft lad and so has lots of room inside, features an additional roll over hoop making it very strong NFR Seat Belts Quick release steering wheel Transponder (Rechargeable) Bias Valve Cooper S Hubs and brakes Hi Los Adjustable Shocks Adjustable Tiebars Adjustable Bottom Arms Rear Radius Arms adjustable for Camber and caster Lightweight Alloy Drums Race engine Featuring all the right bits Including Ultralight Flywheel,Verto Clutch (weight is towards centre rather than outside) EN16T Stronger crank shaft A+ Rods ARP Rod Bolts Centre Main Strap Lightened Pistons +40 Block Decked Pistons +10 above block face Custom Ground and Timed Camshaft Duplex Lightweight Vernier Timing Gears J Casting Cylinder Head, running a sensible compression ratio (scope to increase for more power/less reliability) Bronze Valve guides Narrow Valve Seats HIF38 SU Carburettor legal manifold the right spacers and Sock Filter Specially selected pressed steel rockers for matched and higher lift Specially curved Distributor and rare to fine points capable of 8000RPM Lucas Gold Coil Standard Radiator This engine never overheated, never lost oil pressure, never had to have a head gasket replaced and produced 60HP at wheels when last rolling road tuned in October. Can come with wheels & spares as required to suit budget (lots of spare blocks, rods, heads, gearboxes, driveshafts wheels etc,) Will split 07967 802816
  2. PM me or text or call after 6pm weekdays.
  3. Due to being massively let down by a third party who cut my daughters Mini down to rollcage and didnt rebuilt it I'm looking for a Ministox chassis. Bare chassis preferred ready to bolt everything onto, but consider anything, she is a white top so not looking for a superstar car or superstar prices If nothing turns up then I will rebuild over winter for next season but she would love to get back out racing after her accident on IOM this year. What's out there does anyone have one sat in the corner of a yard or roof of a container.... Paul 07967 802816
  4. Careful with the boby restraints Ian, some my read it that its a bra
  5. Wanted a decent proper factory built trailer with weight plates etc, tilt bed preferred with hydraulics has to to double up moving campervans from time to time weighing 2 T and then hauling a ministox about at weekends. Winch lights markers brakes hand brake etc required and working, tyre rack and storage box would be nice. To tow behind a 4x4 I'm in Coventry but would travel for right one. paul (at) lpgimports.co.uk or 07967 802816 or PM me.
  6. Transponder wanted for a Ministox Will be at Coventry Saturday evening. Paul
  7. better to clarify if it is 2 in the auction or 1 is a bit fluffy in description, better to clarify. Paul
  8. Hi Thanks for all the pointers have had a couple of busy days not done anything yet and awaiting the rules and regs from National Mini Stox so I can try and buy something that is correct and current or know what needs doing. Paul
  9. Hi thanks for all the replies. Yes emailed the Nat Mini Stox for some guidance on engine and specs and if ORCI are near or worth considering and reworking. Hi Danny the no engine isnt really a problem I just need to know what goes in them I have loads of mini engines here from 850 to overbored 1399 and even a couple of turbo lumps, but assuming they are 998's with little or no mods apart from cam?. Saw the pickup and the van at Birmingham last year and saw the pickup hit the armco hard last week at Buxton will give you a bell tomorrow. Any pictures of which are for sale? 616 Redditch is just down the road from me so handy to look at it. What we/she is really after is something to start in that is built and has raced and has all the safety gear seat belts snap off wheel transponder etc either with or without engine would be fine as long as I know what I can put in there, we have tonnes of wheels brakes etc, if she got one now that was good enough to be out racing ASAP and then could use it as a reference and build one up for next year as I have a couple of not worth welding up minis floating about. Thanks all. Paul
  10. Thats a ORCI one need a BRISCA one or to know what the differences are before contemplating converting a ORCI to BRISCA. Cheers Paul
  11. Hi After dragging me to Buxton last Sunday my 13 year old daughter Katie is still as transfixed with Ministox as ever and really really wants one, she can potter about around the farm tracks were my workshop is in minis and now wants to go potter around ovals. Has anyone or know of an old car ministox suitable for a novice, even one needing some work, I have a tonne of parts here and I think she would get more out of it fixing it up as well. If this needs moving to another area no problem. Paul
×
×
  • Create New...