Jump to content

Neil Fry

Member
  • Joined

  • Last visited

  • Days Won

    12

Everything posted by Neil Fry

  1. Small block built by Ian Whitworth, Original Chevy block with five bolt main, powles cam, Ally ported Brodex Heads, complete with headers, torque starter motor, carburetor , MSD brand new distributor, canton left turn sump, Flex plate air filter, etc. This engine has come straight off the dino, has never been raced Call Carl on 07900 185596 £8750.00
  2. Andy Craven Engineering is selling this brand new F1 car. Complete with small block engine or just complete car as seen at NEC less engine, bell housing and gearbox. This brand new car has some additional features: A wider cab designed to fit a taller driver in i.e a Dutch driver.Meets new regulations with plated steal Side to Floor try.Four link front suspension.N/S shocker let in to cab side.Engine mounts fabricated in to chassis at rear.Custom designed front engine mounts.Designed to meet all Dutch rules including stainless steal fuel tank.Full containment seat (price a containment seat).Four brand new tyres with B&K WheeWhitworth Race Engine, a small block Chevy straight off the dino, with dino sheets, Powles cam, Ally Brodex ported heads, too much information to list ring Carl on 07900 185596 for more information.Doug Nash gearbox, button fly wheel. Complete Car £25,995 or any reasonable offer Chassis less engine, bell housing and gearbox. £16,995 or any reasonable offer. Any one buying this car will get lots of back up from ACE Engineering and B&K services (As long as you buy all your wheels and parts from them)
  3. Brand new, one of the best small blocks around. This engine was built to order with the best parts available, but unfortunately the purchaser was unable to proceed and the engine now needs to be sold. A £2000 deposit has already been paid on this engine.......so you are effectively getting a £2k discount!! 431ci (7059cc) Iron Eagle block Dart heads (ported) BLP 1040cfm carb on Dart raised runner and Wilson spacer complete with 6" K&N Wet sump with remote filter and all associated pipework Crower cam profiled specifically for F1 Stockcars Complete with flexplate. The engine was built by Ian Whitworth and produces 625bhp and 610lb/ft of torque (Dyno sheets supplied) £15,500 (NO VAT)......check the spec, it's worth well over £17k!! Tel Ian on 07814 648982 for further details if needed
  4. This car is crying out for a new owner......so.......BUMP
  5. Change of plans means V8 Hotstox for sale. This is an Andy Smith chassis that has been successful in several sets of hands. It comes complete, on the button and ready to race. It has a Kirkey seat, belts with NASCAR style clasp and "pop off" steering wheel......the usual stuff! It runs on Transit axles both back and front with the adjustability of spring boxes on the rear. Forward mounted, lightweight, tarmac style wing completes the looks. Now the business bit....... The engine is a 3.5 litre with Omega pistons, ported and polished heads running Volvo rocker gear and solid lifters. The block has been decked to increase the compression ratio. The cam is a 238 and is on vernier timing gear. The manifolds (both inlet and exhaust) have been ported to suit the heads. The sump has been extended and letterboxed for turning left. Ali radiator and she never gets hot! There is a button flywheel and Tilton clutch driving through the usual ZF box. This car will get you well past where the current owner is grade wise......it has taken a number of drivers to red and has the potential to go even further in the right hands. Further information can be got via PM, e-mail or telephone......07789 891549 anytime or 01924 410606 after 5pm.
  6. For sale, the "Green Machine" V8 Hotstox as raced by me (Neil Fry) in 2006. Complete and ready to race with tarmac type wing. Re-bumpered and nerfed at the start of last season as well as a new back axle. Excellent value at £2200, and remember......its ready to hit the tracks at that! Good strong car that will start you going up the grades on the fun side of the fence. PM or e-mail me (all in my profile) for further details or ring on 01924 410606 (after 5pm) or 07789 891549 any time. Go on.......you know you want to have a go!! Neil
  7. One of each for me too Spike, please....if I can find you!! Neil
×
×
  • Create New...