kjc294

wing know sold

Taylormade f1 shale wing for sale . gd condition 150ovno

traler now sold

Hi we have for sale a single axled car trailor, could be used for mini, or hill clim car, rebel that soert of size vehicle. could even be slighlty modified to carry a couple off motor bikes. the trailor is light for us to push around will hopefully getting it weighed soon so will be able to tell u how much it does way. the chassis is a caravan chassis, which we stripped down back to chassis only and built a new frame on for support and strenght. the chassis and new steel work has all been painted to protect it. the trailor bed is made from wold with alloy strips and sealed up over the gaps of would to provent water getting in. there is also on the end of the trailor two chquar plate strips to protect wood were the vehile would come on to the trailor of the ramps. the ramps are with the trailor they latch on to the front of trailor for easy access when removing and storing away for traveling. the ramps are made up from L section steel with woodern inserts and supports for wood. all wood and new steel has been painted and treated. the arches are made up of steel frame with chaquar plate over the top, a vehicle could go over the arches if need be the y will be strong enough. the trailor is all lighted up all working. all wiring is brand new. has reflectors on back and on side of trailor. has front white marker lights on trailor to all wired up and in working condition. the trailor is new. the axle has been stripped off and cleaned up and put back on with all new bolts and nyloc locking nuts. the tyres are in good condition. the back off the trailor slightly slopes of to make it easier for loading. the vehicle on to. the dimentions of the trailor are as follows: the width between arches is 61" (5ft x 1) the overall width is 77" (6ft x 5") the length of the bed on the trailor is 11ft x 1" the overall length from towing hitch to end of trailor is 16ft. the trailor looks very smart. please check measurement of vehicle first. any questions please ask. I have more pictures if required.

sold

we have a shortened chevy box ready for use for sale, £120ono contacted chris on 07980357484

I have for sale a bullet 2 ga gauage panel, as brand new still boxed, i brought it at n.e.c to put into my stock car as car has now been sold i have no need for them. £200 ono contact jon on 07805937202,

hi just read ur message and i hav i taylor tar wing only done 3 meetings in gd condtion in white . £180 ono thx chris (394) tel :07980357484

new price . £7200ono

this chassis is now sold thx

brisca f1 shale car ready to go last raced by keith roberts (171) and i think was builit by peter falding good stong car and comes complete with. big block chevy 463 . doug nash gearbox that drive tho a triple plate clutch has msd system. l.d rear axle and a transit front. coilovers on all four corners. 1 shale wing . has a newish kirkey sat and cover. transponder . left foot bracking and hydraulic clutch. power steering with ldv steering box . on the button ready to start and go £7950ono call 07980357484 and ask for chris thx

more pics

some pictures

i have for sale a brisca f1 bare chassis, wasorg built by mark taylor 490, i last raced the car in 2007 season. i have been to chassis. i have replace the sides on the roll cage, changed the steering mounts in cab, and seat mounts, i have rebumped the car front and back and both side rails all the way into chassis have replaced a few bents beams inside chassis were front bumper has come in on them, the side nerfs have lower pods built on ready for paneling, i am in the process of putting a full undercage on the car only part left is the part below the engine sump, (sump guard area). the battery mount is there, the fuel tank mount is there, the mounts for a tarmac mark taylor wing is all in place, the chassis legs are very straight, i have been building the car just for tarmac use as it is a very light and low to the ground car perfect for tarmac. the panels are with the car from 2007, would be a perfect project for someone to finish off, due to sucumstances i am unable to finish the car off bit gutted after all time and money we have spent on the car to just get it to this stage. £500 there is also a light weight kirkey seat with head restraints on mounted into the car already, chassis and seat £575ono i am able to put pics on if required if so please ask, thanks Jon 07805937202

hi im looking for a set of ali heads for a chevy big block with big valve ,rectangular ported heads . ethier pm me or ring ask for kev thx tel: 07922072085 tel: 07980357484

car now sold thx for all the interest

car sold

Wing now sold

contact number 07980357484

Brisca F1 rolling chassis for sale, was built by tig art steve Taylor 93, has a transit rear back axle on double licked panard rods, and a 5:1 diff, runs a transit front axle on single panard rods, kirkey seat engine mouns for a big block chevy, and comes with roughly 6-7 wheel rims few othe bits and bobs, panels floor etc, the car was raced last year by 294 if yo uhave and questions please ask, thanxs jon quick sale looking sensible offers around £750

NFR brisca f1 tarmac wing few seasons old used by me 294 last year, in good condition, light weight £100 jon 294 brisca f1 any more info just ask,

i have a rover 220td for sale, dark blue, 114,000 miles, cd player, 16 inch multi spoke alloys, with good tyres all round, fantastic run around car, looking to sell pretty quick, sensible offers please, the car has an mot but the tax runs out at the end of feb, if u require any info just ask or ring me on 07515975559 Jon

fwj rolling chassis now sold thx

my last year chassis,

[some pictures of the fwj chassis,