Brisca F2 / Superstox HCD chassis very straight, only ever done 3 races from new. 2L Pinto containing Brian Randall internals built by Saloon Stock World Champion Simon Welton. Taxi 4 core radiator, RS200 alloy bell housing, Brian Randall shortened gearbox, 5 link rear end and Randall Motorsport front hubs and Morris Minor steering rack. The car was built with steel braided hoses throughout (fuel and brakes), new facet fuel pump, new brake bias valves, aluminium CNC machined pedals and new Kirkey aluminium seat and cover. The Also included within the car are my aluminium steering wheel with quick release hub and Total 5 point harness both of which came from my Saloon Stock. It also has a light weight sprint car wing but this is second hand. The car also comes with the following spares: *Diffs Ratio Qty 3.89 9 3.8 2 3.7 1 3.54 1 4.1 2 4.4 1 *22 raced half shafts, all have been turned down to take brake discs and the bearings have been welded but some may need new bearings *17 unraced half shafts, will need turning and welding *6 axle casings *2 shortened props *2 standard car props *3 morris minor steering racks *6 brand new inner tubes *27 Weller wheels, all 13 ranging from 5.5j to 10j *3 new Spax dampers *4 Avo dampers I also have 6 complete axles waiting to be stripped, Im not entirely sure what diffs are in them, and various other bits and pieces (springs, starters, alloy wheels etc.) that I am willing to include dependant on reasonable offers. Please contact Richard on 07931291145.
Rich D changed their profile photo